A wired Ethernet connection is preferred over a wireless Wi-Fi connection for a simple reason: fast internet speeds.
However, it can sometimes be slower than a wireless connection.
Is your Ethernet connection slower than your Wi-Fi connection?
Image Credit: Manuel Esteban/Shutterstock
This goes against the grain, so there’s something wrong.
Therefore, replacing the cable should deal with the connection issues.
Check the Ethernet Cable Category
Are you using an Ethernet cable that is a couple of decades old?
Image Credit: Aquarius Studio/Shutterstock
If so, check the cable category.
Those of a lower category, like category four, could only transfer data at 16Mbps.
you could increase the speed by replacing the cable with a higher category one.
Image Credit: Aquarius Studio/Shutterstock
If you notice a significant increase in speed with this switch, one or both ports are faulty.
Therefore, you should avoid using them in the future.
If this change makes no difference, suggesting ports are intact, move on to the next fix.
If updating or installing new drivers does not make a difference, move on to the next step.
While updating your router’s firmware may differ depending on the manufacturer, most of it will be similar.
Our guide toupdating the router’s firmwarewill be a good place to start.
If the firmware interface of your router seems complex, visit the manufacturer’s website for instructions.
However, if your Ethernet is still slow, you should try this less desirable solution.
Our guide toresetting your data pipe tweaks on Windowsshows you how to do it.
If that doesn’t solve the problem, it’s likely a hardware issue.
Additionally, the fixes covered will assist you in speeding it up.
If none of the methods work, your ISP should step in to save the day.
