This error can be quite frustrating, as Windows doesnt give you any instructions on how to fix it.
Sometimes, you just have to update the web connection driver or trigger the web connection troubleshooter.
However, the solution might be a bit more complicated, but there’s no need dont worry.
To test it, take a stab at connect to the same online grid using a different rig.
If you run into the same error, youll have to solve your data pipe issues.
you might also try reinstalling the drivers to see if that fixes the problem.
Update data pipe Drivers
To patch your data pipe drivers, perform the following:
2.
To update Windows to the latest version, pressWindows key + Ito bring up theSettingsmenu.
Then, clickWindows Updates > Check for updates.
Windows will search for any updates and install them automatically.
Once the process is complete, venture to connect to the connection.
Disable IPv6
IPv6 is really not needed for most connections unless explicitly specified by your router or ISP.
So, you should disable it and try connecting to the wireless web connection again.
Here is how you might disable IPv6 on your setup:
5.
To fix this, you’ll need to release the IP and flush the DNS cache.
Here’s how to do that:
7.
Turn Airplane Mode On and Off
This quick trick might be enough to solve your web connection issues.
By turning on Airplane mode, you instruct Windows to completely disconnect from all networks.
This allows you to re-establish a stable connection once you disable Airplane mode.
Open Windows Action Center and choose the Airplane modetile.
Wait a couple of minutes and turn it off.
Then, make a run at reconnect to your internet.
If Airplane Mode is missing from Action Center, there are other ways to enable and disable it.
Use the web link Troubleshooter
Windows 11 has an in-built troubleshooter to detect and fix web link issues.
To trigger the Windows data pipe Troubleshooter, adhere to these instructions:
10.
The method for resetting a router will vary depending on what model router you own.
However, you’ll have to reconfigure the router after resetting it.
Connect to the web link using anEthernet cable.
Not only will it fix the issue, but Ethernet cables are more reliable and will offer better speeds.
